Sensor
Hiwonder
Glowy Ultrasonic Sensor Distance Measurement Programming Robot Car Obstacle Avoidance Module
- Glowy RGB light color can be changed
- Compatible with expansion boards
- Support LEGO DIY
Hiwonder
GPS Beidou Positioning Module BD Dual-Mode Satellite Navigation IMU Inertial Navigation Sensor for ROS1/ROS2 Robot
- 【High-performance】Hiwonder's GPS module is a high- performance GNSS positioning and navigation module based on ATGM336H-5N, offering positioning accuracy of < 2.5 meters. It has the advantages of Small size, low cost, high sensitivity, low power consumption and user-friendly operation.
- 【Supports intergrated positioning, navigation and timing functions】This module supports Beidou-2 and Beidou-3 (B11and B1C), GALILEO, GPS/QZSS/SBAS, GLONASS, and other satellite navigation systems. In addition, it can simultaneously receive signals from multiple satellite navigation systems, enabling integrated positioning,navigation,and timing functions.
- 【Provide rich tutorial materials】Hiwonder provides a wealth of tutorial materials, such as PC software, operating instructions, development manuals, development codes, etc.
Hiwonder
IMU Inertial Navigation Module ROS1/ROS2 Robot MEMS USB Magnetometer 10-axis ARHS Posture Sensor
- 【High-performance three-dimensional motion and posture measurement system】The IM10A inertial navigation module includes a 3-axis electronic gyroscope + 3-axis accelerometer + 3-axis magnetometer + barometer (angle + altitude), combined with a high-dynamic Kalman filter fusion algorithm to provide users with high-precision, high-dynamic, real-time compensation 3-axis posture angle data.
- 【Rich data output】The IM10A inertial navigation module can output Euler angles (Roll, Pitch, Yaw), quaternions, position, speed, acceleration, angular velocity, and magnetic field vectors. It can provide output frequency up to 200Hz in real time, thus greatly reducing the research and development time for various needs.
- 【Supports multiple communication methods】 Supports USB/UART/I2C communication methods, is more efficient and compatible with Raspberry Pi, STM32, and Jetson series development boards, providing more development possibilities for DIY makers.
- 【Provide rich tutorial materials】 Hiwonder provides a wealth of tutorial materials, such as PC software, operating instructions, development manuals, development codes, source codes, etc.
Sensor Module
Joystick Module: Hiwonder Robot Module Compatible with Arduino/ Raspberry Pi/ Jetson Nano/ micro:bit
- Working voltage: DC 5V
- Port type: 5264-4AW
- Size: 50 x 20 mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Temperature measurement range: -40℃ ~ +85℃
- Humidity measurement range: 0 ~ 99.9%RH
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
Sensor Module
Hiwonder Ultrasonic Module Detection Distance Sensor Compatible with Arduino micro:bit Programming
- Working voltage is 5V and the current is 2mA
- Detection angle is 15°
- Ranging distance is 2cm-400cm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
Sensor Module
Soil Moisture Sensor Module Detector Soil Hygrometer Detection Module Detection Depth for Arduino UNO
- Working voltage is 5V
- AD converter digits is 10 digits
- AD value: 0~400 (dry soil); 400~800 (moist soil); 800~950 (in the water)
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
Sensor Module
Raindrop Sensor for Automatic Watering System Compatible with Arduino/ micro:bit/ Raspberry Pi
- Working voltage is 5V
- AD converter digits is 10 digits
- AD value: 0~400 (no rain environment); 400~1000 (rainy environment)
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- 21 keys micro-remote controller
- Powered by CR2025 battery
- Support Hiwonder Qbot, Qbit, Spiderbot, Tonybot and xArm2.0
Sensor Module
Glowy Ultrasonic Sensor Distance Measurement Programming Robot Car Obstacle Avoidance Module
- Glowy RGB light color can be changed
- Compatible with expansion boards
- Support LEGO DIY
- High sensitivity for robot car DIY
- Easy wiring with 4PIN connector
- Holes on the module are compatible with LEGO for DIY
- Provide detailed learning tutorials
- 4-way tracking with high sensitivity
- 4PIN connector for easy wiring
- Compatible with LEGO
- Working voltage: DC 5V
- Working current: 5mA
- Size: 50 × 20 mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Port type: 5264-4AW
- Size: 50 × 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Working current: 15mA
- Measurement distance: 2cm ~ 400cm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks
- Working voltage: DC 5V
- Working current: 5mA
- Size: 50mm x 20mm
- 4 Pin wire port. Connecting wire is provided. Easy to connect
- The holes are compatible with LEGO bricks